Wind Data Process from OWC to GWC

[Alex]

Dear WAsP team,

I had a challange in this process from OWC to GWC,

the OWC wind speed at 50m height is 5.4m/s, the vector map was imported and then calculate the GWC, at 50m height R-class 1 the wind speed is only 3.7m/s and 100m height R-class 1 wind speed is 4.02m/s,

it seems that the GWC wind speed is far smaller than OWC, is this normal or some parameter I selected was wrong and led to this?

Thanks in advance.

[Stefan Blagojevic]

Hi Alex,

This might be a bit difficult to tell without looking at the project. 
Is the GWC located far away from the OWC location perhaps?

Best regards,
Stefan

[Alex]

Dear Stefan,

Thanks for your response,

actually I just checked, the met mast is the same location with the site I'm working on,

no idea why, got stucked for a while.

Regards

Alex

[Stefan Blagojevic]

Hi Alex,

Can you create a support ticket through the support form: Support - WAsP (link at the bottom of the page)
If possible, please attach a copy of the workspace for me to investigate.

Best regards,
Stefan