Dulce

thanks Rogier I don't have access to that URL directly. Maybe that is the problem.

Hello Rogier! Thank you so much for your time and your help. I used your script: "Create bounding box form lat/lon" for create the rectangular polygon and then use it to run the script "Get Worldcover landcover polygons" but with same result . Unfortunately, the error continues while I'm trying to connect with it seem the original data source host='esa-worldcover.s3.eu-central-1.amazonaws.com'. I tried in version 3.14 & 3.28. Next, I copy the error message that QGis shows. Should I have to connect with a different URL? Thanks in advance Dulce 2023-09-18T12:48:56 CRITICAL Traceback (most recent call last): File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\urllib3\connection.py", line 159, in _new_conn conn = connection.create_connection( File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\urllib3\util\connection.py", line 84, in create_connection raise err File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\urllib3\util\connection.py", line 74, in create_connection sock.connect(sa) TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond During handling of the above exception, another exception occurred: Traceback (most recent call last): File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\urllib3\connectionpool.py", line 670, in urlopen httplib_response = self._make_request( File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\urllib3\connectionpool.py", line 381, in _make_request self._validate_conn(conn) File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\urllib3\connectionpool.py", line 978, in _validate_conn conn.connect() File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\urllib3\connection.py", line 309, in connect conn = self._new_conn() File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\urllib3\connection.py", line 171, in _new_conn raise NewConnectionError( urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond During handling of the above exception, another exception occurred: Traceback (most recent call last): File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\requests\adapters.py", line 439, in send resp = conn.urlopen( File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\urllib3\connectionpool.py", line 726, in urlopen retries = retries.increment( File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\urllib3\util\retry.py", line 446, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='esa-worldcover.s3.eu-central-1.amazonaws.com', port=443): Max retries exceeded with url: /v100/2020/map/ESA_WorldCover_10m_2020_v100_N12W090_Map.tif (Caused by NewConnectionError(': Failed to establish a new connection: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond')) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "C:\Users/----/AppData/Roaming/QGIS/QGIS3\profiles\default/python/plugins\wasp_scripts\processing_provider\worldcover.py", line 291, in processAlgorithm r = requests.get(url, allow_redirects=True) File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\requests\api.py", line 76, in get return request('get', url, params=params, **kwargs) File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\requests\api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\requests\sessions.py", line 530, in request resp = self.send(prep, **send_kwargs) File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\requests\sessions.py", line 643, in send r = adapter.send(request, **kwargs) File "C:\PROGRA~1\QGIS32~1.2\apps\Python39\lib\site-packages\requests\adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='esa-worldcover.s3.eu-central-1.amazonaws.com', port=443): Max retries exceeded with url: /v100/2020/map/ESA_WorldCover_10m_2020_v100_N12W090_Map.tif (Caused by NewConnectionError(': Failed to establish a new connection: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond'))

Hello Rogier, Sorry for my delayed answer. Here is the polygon in .shp format https://drive.google.com/drive/folders/1wm32IwDg40uBrkXU313USWJR6SYV0f2y?usp=sharing Could you reproduce the error? This continiuous. Thanks

Could I sent you by an URL to google drive with shapefile?

yes, that's what I did before, cut with ONE polygon layer. But it gives me an error that it can't connect to the page I mentioned, that's why I think it needs to connect to the URL for the whole script to run correctly.

Thanks for your answer. In the video appears the Corine Land Cover 2018 but I thinks this apply only for Europe, and the project is in Latinoamerica. When I click on "Get WorldCover landcover polygons" it seem a problem with conexion to esa-worldcover. The error messages mentioned an error connection with esa-worldcover.s3.eu-central-1.amazonaws.com . I see in CORINE tutorial to mention to make a connection in Qgis What page and URL should I connect to in Qgis in order to Wasp script plugin work correctly? Thanks a lot for your reply!

Hello everybody! I want to calculate the roughness map from data downloaded by Copernicus Global Cover but I have not been able with Map Editor (version 12) Here what I have done. In Qgis: * I downloaded raster from Copernicus Global Cover Downloader thanks to a plugin in Qgis - It downloads a "discrete classification map" raster. * I clipped to my area of interest * I remove the pixels that do not correspond to the landcover classification because is a discrete raster. * convert raster to polygons vector file with pixel values of classification. * add Z0_int and Z0_ext values to attribute table In Map Editor: * I import this .SHP file in Wasp Map Editor but it gives me 7053 crosspoints. It doesn't matter if I ignore them, I can't continue working with those errors. * When I compare with a .map file generated from WindPRO (nor for me) in another area (not in Europe) I notice visually that there are also have huge physical crosspoints although the error are not marked by Map Editor. Everything is similar except that in file recognize "Roughness LINE-WEBS" and reocognizes the value of z0_right, z0_left and Webs (27915 webs and 27915 roughness areas!) *In the help section I found that "roughness-line web is the web consisting of roughness lines interconnected by node points: lines joined in a common node belong to the same web." *I suspect the reason the other file doesn't throw an error is because it has those web lines but I haven't found how I can activate them in my file. There are also the nodes that recognize nodes. (In their help section: "nodes is a A "star-point", where three or more roughness lines meet, with the roughnesses of the involved contours matching round the node point). *The roughness lines web are not activated even if I go to Roughness Consistency-EnableWebs How can I activate them in Map editor? -Qgis plugin On the other hand, I tried the plug in for Qgis indicated in the forum: https://data.dtu.dk/articles/software/Using_QGIS_to_create_WAsP_maps/20495178?file=38709351 I used the tool "Polygons to roughness lines" and then I saved in .shp format and the result using the tool "Save WASP roughness layer" and when I open the .map file in Map Editor I get 1509 cross lines error and 3178 dead-ends. Also I tried tool "Get WorldCover landcover polygons" but they cannot because mention that "The clipping layer must consist of a single feature only to avoid downloading too many files! " Thanks!