GianlucaA

Hi Ray! Thanks a lot, it sounds perfect and I would be glad in testing it. Please send me and email with details. After testing it, I 'm going to adapt the for the script instead of the "patch" I created to overcome it ;) Regards Gianluca

Hi Ray, Thanks a lot for the feedback. I will try to overcome the issue with other approaches, as an explicit typecasting is not allowed. But I would really appreciate if this can be directly done with your support in regular WAsP licence, since other parameters related to the distribution (A,k) can already be accessed in write mode. (via typecasting, of course) Thanks a lot for the support G.

Hi Duncan & Ray, Thanks a lot for your feedback and support G.

Hi @All, I need to change some parameters iteratively via script to wind atlas class, related to several GWC object, with wasp (version 11.1), . I see that there is a typecasting that allows it (CastRveaWeibullDistributionToRveaWeibullDistributionEditable) and I can successfully change wind atlas properties (A,k) with it. Unfortunately I cannot access sector frequencies, that seems to be a property of other objects, (I'm guessing the class: IRveaWeibullWindEditable). Does anyone know which object to access and the proper typecasting method, in order to allow it being accessible in write mode by user ? Thanks in advance for any hint!! Gianluca

Hi Morten, I was updating the post in the same moment I received your feedback ;) . I overcome the issue: I wasn't updating the typecasting of the configuration inside cycle, and so I was always pointing to the first configuration parameters read outside the cycle. Basically I was cycling without effects .... Here some feedabck results. With a for cycle I changed the heatflux offset parameter and calculated my reference for each step Step HOL Vt At Kt 1 -80 6.347 7.153 2.498 2 -81 6.348 7.154 2.498 3 -82 6.349 7.156 2.498 4 -83 6.350 7.157 2.498 5 -84 6.351 7.158 2.498 6 -85 6.352 7.159 2.498 7 -86 6.353 7.160 2.498 8 -87 6.354 7.161 2.498 9 -88 6.355 7.162 2.498 10 -89 6.356 7.163 2.502 11 -90 6.357 7.164 2.502 12 -91 6.358 7.165 2.502 13 -92 6.359 7.166 2.502 14 -93 6.360 7.168 2.502 15 -94 6.361 7.169 2.502 16 -95 6.362 7.170 2.502 17 -96 6.363 7.171 2.502 18 -97 6.364 7.172 2.502 19 -98 6.365 7.173 2.502 20 -99 6.366 7.174 2.506 21 -100 6.367 7.175 2.502 22 -101 6.368 7.176 2.506 23 -102 6.368 7.177 2.506 24 -103 6.369 7.178 2.506 25 -104 6.370 7.179 2.506 26 -105 6.371 7.181 2.506 27 -106 6.372 7.182 2.506 28 -107 6.373 7.183 2.506 29 -108 6.374 7.184 2.506 30 -109 6.375 7.185 2.506 31 -110 6.376 7.186 2.510 Seems to be exactly what I wanted ;) Thanks again for the precious hints! G.

Hi Morten, Thanks for the reply and thanks a lot for the hint: It drove me to solve half a very important part of the issues! Now I can access the configuration parameters, but the ones I need they are on line 127-133 (maybe we have different versions of the codes) Set Configuration = ReportingAssistant.TypeCaster.CastMemberToRveaConfigurable(Atlas).Configuration .... Set Parameter = Configuration.ParameterByID("PROFILEMODEL") I can modify the parameters I access (in my case: heatflux parameters) and I find them modified in the workspace, as property of the parent object (in my case the reference). So I can for example update manually the calculations (via gui) and I see changes in the predicted wind climate. Now the new problem is that if I set parameters inside a cycle (eg: "for" statement) and I update the calculations in each cycle (".DoAllPossibleCalculations(True)") my output main results (variables in "PredictedWindClimate") they do not update themselves as expected, or sometimes they just do it for the first iteration, but not systematically. I worked around until export results also addressing to the example "Turbine site vertical profile (Excel).was9", where a similar approach has been used Here and example of my output results Step HOL V A K E 1 -100 7.469337 8.400805 2.685547 383.2154 2 -75 7.33301 8.252588 2.634766 367.2364 3 -50 7.33301 8.252588 2.634766 367.2364 4 -25 7.33301 8.252588 2.634766 367.2364 5 0 7.33301 8.252588 2.634766 367.2364 6 25 7.33301 8.252588 2.634766 367.2364 7 50 7.33301 8.252588 2.634766 367.2364 8 75 7.33301 8.252588 2.634766 367.2364 9 100 7.33301 8.252588 2.634766 367.2364 I'm starting guessing that I address to the wrong class, or I typecast in the wrong way. Any suggestion? Regards and thanks again for the support Gianluca

PN: Sorry, I meant to be that my license is a standard one

Hi WAsP users! I'm currently working with WAsP11 scripting. My license is not a standard one ( no developer licence) . I would like to create a script that allows me to access the heatflux calculation parameters (and change them) in a generalized wind climate object, recalculate the wind atlas and store/export wind results. The step has to be repeat more than once for multiple heatflux values and on several climates. In this particular case study, the parent object that contains the climate is a reference site one. The operation is of course possible via gui succesfully; I'm trying to make it automatic accessing the objects parameters, but a straight forward note regarding climate object is found nor under the "IRererenceSite" object description , neither under the "IWaspSite" object description. Does someone have any idea about it? Thanks in advance. Gianluca