Jump to content

Roughness length for rice fields - small drainage/irrigation channels


Recommended Posts

Hi,

I am currently editing an SRTM map for an island, using the WAsP Map Editor.

On this island, rice cultivation is very dominating and there are several plots of rice fields that are separated by small drainage/irrigation channels. The width of these channels can vary between 3 m and 1 m. As such, I seek the following clarifications:

1. Is there a minimum width threshold of a water body for which roughness length becomes significant? If so, what is this minimum width threshold?

2. In my current map of roughness-change lines, is it required to indicate roughness changes for these small drainage/irrigation channels? If so, what would be a recommended value?

Thank you.

D.Bachai.
Link to post
  • 2 weeks later...
Dear D. Bachai,
No, I have never heard of a minimum width threshold for water bodies, but one could make a small case study to explore this. However, I am quite sure that small meter-wide channels will not have any significant effect for a sizeable wind mast or wind turbine.
The recommended roughness for water bodies is always 0 m in WAsP. However, in your case I would suggest a low land roughness for your rice fields, see e.g. http://agrometeorologia.it/documenti/Rivista2015_1/estimation_of_zero_plane_displacement_height_and_aerodynamic_roughness_length_on_rice_fields.pdf
Best regards,
Niels
Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...